A Sabah engineering company serving oil and gas majors.

BEGAS Energy Sdn Bhd delivers civil, mechanical and electrical maintenance and engineering services, led by a management team with operator-side experience.

Company at a glance

Built in Kota Kinabalu since 2008.

Incorporated: 4 September 2008
Headquarters: Kota Kinabalu, Sabah
Status: Malaysian Bumiputera company
Company no.: 548062
Disciplines: Civil, mechanical and electrical
Core focus: Maintenance services for oil and gas majors
Sectors: Upstream and downstream
Environments: Onshore and offshore

BEGAS Energy Sdn Bhd was incorporated in Kota Kinabalu, Sabah, on 4 September 2008. Its foundation is in engineering and construction, with civil, mechanical and electrical services as the core disciplines.

The company concentrates on maintenance services for oil and gas majors operating in the upstream and downstream sectors, supporting both onshore facilities and offshore operations.

Services range from HVAC operation and maintenance, valves maintenance and switchboard fabrication to PLC-based systems, piping and structural repair, civil maintenance, VSAT data transmission, pipeline rehabilitation and manpower supply.

BEGAS positions itself as a trusted engineering and construction partner, committed to reliability, innovation and the standards that oil and gas clients expect.

Vision & mission

Where we are heading, and how.

Vision

To emerge as the premier company based in Sabah, dedicated to catering to the needs of oil and gas majors.

Mission

To realise our business objectives with unwavering dedication to sustainable development, advancing eco-efficiency, fostering innovation and upholding social responsibility across all business activities, so that we meet and exceed stakeholder expectations while contributing positively to the environment and communities where we operate.

Leadership

Led by an engineer from the operator side.

Portrait placeholder · supply approved photo

Mohd Safian Saludin

Founder & Managing Director

Mohd Safian holds a Bachelor of Engineering in Electrical, Electronic and Systems from Universiti Kebangsaan Malaysia (UKM). He is an associate member of the Board of Engineers Malaysia and of the Institution of Engineers Malaysia.

He spent 15 years with PETRONAS Carigali Sdn Bhd, in Sarawak Operations from July 1992 to December 1994 and in Sabah Operations from January 1995 to December 2007. His last position was Senior Manager of the Asset Maintenance Department, covering the Southern Sector: Samarang, Kinabalu, Sumandak and Lgast operations.

EW Revisit
Tembungo new technology application
Samarang topside major maintenance
Pipeline replacement and enhancement initiatives

He also represented Sabah Operations in decision-making forums that set short- and long-term maintenance plans.

Our team

The people behind every project.

Engineers, planners, contract and procurement specialists and quality coordinators working from the Kota Kinabalu office.

Shahlan Rusian

Operations Manager

Oversees civil, mechanical and electrical projects and building maintenance across onshore and offshore work. Bachelor of Electrical and Electronics Engineering, Universiti Malaysia Sabah.

Syahreezal Shamran

Project Engineer / Planner

Coordinates and plans electro-mechanical, civil and building maintenance projects, onshore and offshore, with experience since 2010. Diploma in Electro-Mechanical Installation and Maintenance, UniKL MSI.

Ferran Jumat

HVAC Engineer

Joined in January 2021. Services and maintains commercial, residential and industrial HVAC and mechanical ventilation systems. Mechanical Engineering Technology (Industrial Refrigeration and Air Conditioning), UniKL MFI.

D.K. Ilyan Nur Binti Ag Talip

Contract Executive

Joined in 2014 as Tender and Procurement Executive. Manages tenders, contract negotiation and procurement. Degree in Building Surveying, Universiti Malaya.

Mohammad Syariqul Alam Akmadin

QA/QC Coordinator

Coordinates quality assurance and quality control activities, inspections and monitoring of quality management systems. Certificate and Diploma in Quality Assurance Technology, ADTEC.

Ramlah Binti Sulah

Procurement Executive

Manages sourcing, supplier selection and procurement of goods and services. Bachelor's degree in Office System Management, UiTM.

Nurul Fadzeera Aleeda Binti Aldana

Accounts Executive

Manages financial transactions, budgeting and reporting. Bachelor of Business Administration (Hons) in Finance, UiTM Sabah.

Salina Binti Rajikan

Administration & Finance Executive

Joined in 2015 after a decade in banking and finance. Handles administrative and financial functions and procedures.

Mohd Azfer Syafiq Bin Mohd Hasnan

HR & Admin Executive

Responsible for recruitment, employee relations, payroll processing and administrative operations. Bachelor's degree in Administrative Science, UiTM.

Team portraits can be added once approved photographs are supplied.

What we stand for

Four commitments to our clients.

Expertise

Backed by a highly skilled and experienced team.

Innovation

Embracing new technologies and methodologies.

Reliability

Ensuring uninterrupted operations for our clients.

Adaptability

Tailoring solutions to the evolving needs of the industry.

Our advantages

Technical depth, strong networks, fast mobilisation.

Technical competence

A team that understands the rigorous procedures and standards of the oil and gas industry.

Network management

Leadership with a proven record of building networks within major entities, and an understanding of how their systems and key stakeholders work.

Support infrastructure

Strong relationships with service providers allow resources to be mobilised quickly, even at short notice.

Integrated engineering, construction and maintenance services.

Six capability groups covering civil, mechanical, electrical, instrumentation and marine support for oil and gas operations.

All service groups

Instrumentation & Offshore Installation
Onshore Fabrication & Specialist Commissioning
Offshore Construction, Maintenance & Repairs
Electrical Engineering & Construction
Field Instrumentation Maintenance
Marine Transportation & Vessel Cleaning

Instrumentation/Control Engineering & Maintenance
Transportation & Installation of Offshore Facilities

Enquire about this service

Instrumentation/Control Engineering & Maintenance10 areas

Control System DesignDesign and implement control systems for offshore facilities, ensuring efficient and safe operations. Incorporate advanced instrumentation for monitoring and controlling processes.
Instrumentation InstallationInstall and calibrate sensors, transmitters, and control devices for accurate data acquisition. Implement safety measures to protect instrumentation from harsh offshore environmental conditions.
SCADA SystemsDeploy Supervisory Control and Data Acquisition (SCADA) systems for real-time monitoring and control. Ensure communication systems are robust for seamless data transmission.
PLC ProgrammingDevelop and maintain Programmable Logic Controller (PLC) programs for automated control. Implement redundancy and fail-safe mechanisms for critical systems.
Emergency Shutdown Systems (ESD)Design and maintain ESD systems for rapid response to emergency situations. Conduct regular testing and simulation exercises to validate system effectiveness.
Calibration and TestingRegularly calibrate instrumentation to maintain accuracy and reliability. Conduct functional testing and performance verification of control systems.
Preventive MaintenanceDevelop and execute preventive maintenance schedules for instrumentation and control systems. Implement condition-based monitoring to identify potential issues before they escalate.
Cybersecurity MeasuresImplement robust cybersecurity protocols to protect control systems from cyber threats. Regularly update and patch software to address vulnerabilities.
Hazardous Area ClassificationConduct hazardous area classification to identify and mitigate explosion risks. Ensure compliance with international standards for hazardous area installations.
Training ProgramsProvide training programs for operators and maintenance personnel on the proper use and troubleshooting of control systems. Keep personnel updated on the latest advancements in control engineering.

Transportation & Installation of Offshore Facilities10 areas

Logistics and PlanningDevelop comprehensive logistics and transportation plans for offshore facility components. Coordinate with suppliers, shipping companies, and installation teams for seamless execution.
Marine TransportationArrange marine transportation for modules, equipment, and personnel to offshore locations. Ensure compliance with maritime regulations and safety standards.
Heavy Lift OperationsPlan and execute heavy lift operations for transporting and installing large structures. Coordinate with specialised vessels and crane operators for precise lifts.
Installation VesselsDeploy specialised installation vessels equipped with dynamic positioning systems. Ensure vessels meet safety and environmental standards for offshore operations.
Subsea Infrastructure InstallationInstall subsea pipelines, manifolds, and control systems using remotely operated vehicles (ROVs) or divers. Conduct surveys and inspections to ensure accurate installation.
Platform InstallationInstall offshore platforms, including topside facilities and support structures. Conduct loadout, transportation, and installation with a focus on safety and precision.
Mooring SystemsDesign and implement mooring systems to secure floating facilities in offshore locations. Ensure stability and integrity during adverse weather conditions.
Dismantling and DecommissioningDevelop plans for the dismantling and decommissioning of offshore facilities at the end of their lifecycle. Implement environmentally responsible practices for decommissioning.
Weather and Wave AnalysisConduct thorough weather and wave analysis to plan transportation and installation activities. Implement contingency plans for unexpected weather events.
Quality Assurance and InspectionImplement quality assurance programs to ensure the integrity of transported and installed components. Conduct inspections at various stages of transportation and installation.

Onshore Fabrication
Commissioning of Specialist Electrical, HVAC and instrumentation system

Enquire about this service

Onshore Fabrication10 areas

Design and EngineeringCollaborate with design and engineering teams to develop detailed plans for onshore fabrication projects. Ensure compliance with regulatory standards and client specifications.
Material ProcurementSource and procure materials required for fabrication, considering quality, cost, and project timelines. Establish relationships with reliable suppliers and vendors.
Fabrication WorkshopsSet up fabrication workshops equipped with necessary machinery and tools. Implement safety protocols and quality control measures in the fabrication process.
Structural FabricationFabricate structural components such as beams, columns, and platforms. Employ welding, cutting, and shaping techniques to meet design specifications.
Piping FabricationFabricate piping systems for industrial processes, adhering to precise measurements and material specifications. Conduct pressure testing to ensure the integrity of fabricated pipes.
Equipment FabricationFabricate specialised equipment and machinery required for specific industries. Ensure that fabrication meets industry standards and client requirements.
Quality AssuranceImplement quality control measures throughout the fabrication process. Conduct inspections and tests to verify the integrity and compliance of fabricated components.
Modular ConstructionExplore modular construction techniques for efficiency and cost-effectiveness. Assemble components in modules to streamline the on-site installation process.
Logistics and TransportationPlan logistics for the transportation of fabricated components to the project site. Ensure secure packaging and transportation methods to prevent damage.
Onsite AssemblyCoordinate the assembly of fabricated components on-site. Work closely with construction teams to ensure seamless integration into the overall project.

Commissioning of Specialist Electrical, HVAC & Instrumentation Systems10 areas

System Design ReviewConduct a comprehensive review of electrical, HVAC, and instrumentation system designs. Ensure alignment with project specifications, safety standards, and regulatory requirements.
Equipment ProcurementProcure specialised electrical, HVAC, and instrumentation equipment from reputable suppliers. Verify the compatibility of equipment with the project requirements.
Installation and WiringOversee the installation of electrical panels, HVAC units, and instrumentation systems. Ensure proper wiring and connection of components according to design specifications.
Power DistributionDesign and implement efficient power distribution systems. Conduct load testing and ensure balanced power distribution across the facility.
HVAC System CalibrationCalibrate HVAC systems for optimal temperature control and energy efficiency. Implement zoning strategies for different areas within the facility.
Instrumentation CalibrationCalibrate instrumentation devices for accurate measurement and control. Conduct functional tests to verify the performance of sensors and control systems.
Safety Systems IntegrationIntegrate safety systems within the electrical and instrumentation framework. Ensure compliance with safety regulations and implement emergency shutdown systems.
Testing and ValidationConduct comprehensive testing of electrical, HVAC, and instrumentation systems. Validate the functionality and performance of each system component.
Documentation and As-Built DrawingsCreate detailed documentation of system configurations and specifications. Develop as-built drawings to reflect the actual layout and connections.
Training and HandoverProvide training to operational staff on the use and maintenance of electrical, HVAC, and instrumentation systems. Hand over the fully commissioned systems to the client or end-user.

Offshore Construction
Maintenance and Repairs of Offshore Facilities

Enquire about this service

Offshore Construction10 areas

Platform InstallationInstall offshore platforms, including fixed platforms, floating production systems, and subsea structures. Coordinate heavy lift operations and ensure precise positioning.
Subsea PipelinesInstall subsea pipelines for oil and gas transport. Utilise specialised vessels, remotely operated vehicles (ROVs), and divers for precise installation.
Topside ModificationsExecute modifications and upgrades to existing topside facilities. Implement structural enhancements and integrate new equipment to improve production capabilities.
Living Quarters InstallationInstall living quarters and accommodation modules for offshore personnel. Ensure compliance with safety and living standards.
Jacket Fabrication and InstallationFabricate and install jacket structures to support topside facilities. Conduct loadout, transportation, and precise installation.
Bridge and Flare InstallationInstall connecting bridges between platforms and flare structures for safe gas disposal. Ensure structural stability and compliance with safety regulations.
Riser Systems InstallationInstall riser systems to connect subsea wells to surface facilities. Consider flexible risers or rigid pipes based on project requirements.
Mooring System DeploymentDeploy mooring systems for floating facilities. Ensure stability and secure positioning in dynamic offshore environments.
Offshore Wind Farm ConstructionParticipate in the construction of offshore wind farms, including the installation of wind turbines and associated infrastructure. Utilise specialised vessels and equipment for offshore wind projects.
Underwater Surveys and InspectionsConduct underwater surveys to assess the condition of existing structures. Perform inspections to identify potential maintenance and repair needs.

Maintenance and Repairs of Offshore Facilities10 areas

Routine InspectionsConduct routine inspections of offshore platforms, pipelines, and equipment. Utilise inspection technologies, such as drones and ROVs, for comprehensive assessments.
Corrosion ProtectionImplement corrosion protection measures for offshore structures. Apply coatings, cathodic protection, and other techniques to prevent corrosion.
Structural Integrity AssessmentsPerform structural integrity assessments of platforms and subsea structures. Utilise structural analysis tools and conduct non-destructive testing (NDT).
Equipment MaintenanceConduct regular maintenance of equipment, including pumps, compressors, and valves. Implement preventive maintenance programs to minimise downtime.
Pipeline RepairsAddress pipeline issues such as leaks, corrosion, and damage. Utilise techniques such as hot tapping and pipeline isolation for repairs.
Emergency Response PlanningDevelop and implement emergency response plans for quick and effective responses to incidents. Conduct drills to ensure personnel are prepared for emergency situations.
Underwater Welding and RepairsPerform underwater welding for repairs to subsea structures and pipelines. Address issues such as weld corrosion or damage.
Replacement of Aging InfrastructurePlan and execute the replacement of aging infrastructure to ensure long-term reliability. Consider the use of new materials and technologies for improved performance.
Environmental ComplianceEnsure compliance with environmental regulations during maintenance and repair activities. Implement measures to minimise the environmental impact of operations.
Documentation and ReportingMaintain detailed records of maintenance and repair activities. Provide comprehensive reports detailing the condition of facilities before and after interventions.

Electrical Engineering & Maintenance
Electrical Construction Work

Enquire about this service

Electrical Engineering & Maintenance10 areas

Design and PlanningCollaborate on the design and planning of electrical systems for industrial, commercial, or residential projects. Consider factors such as load requirements, safety regulations, and energy efficiency.
Power Distribution SystemsDesign and implement power distribution systems for efficient electricity supply. Consider factors such as voltage regulation, load balancing, and redundancy.
Electrical Control SystemsDesign control systems for automation, including Programmable Logic Controllers (PLCs) and Supervisory Control and Data Acquisition (SCADA) systems. Ensure seamless integration with various equipment and processes.
Instrumentation and MeasurementSpecify and install instrumentation for measuring electrical parameters. Implement monitoring systems for real-time data acquisition.
Lighting SystemsDesign and install lighting systems for both indoor and outdoor spaces. Optimise lighting designs for energy efficiency and user comfort.
Emergency Power SystemsDesign and implement emergency power systems, including backup generators and Uninterruptible Power Supply (UPS) systems. Ensure reliable power supply during outages.
Energy Management SystemsDevelop and implement energy management systems to optimise energy usage. Incorporate smart technologies for efficient control and monitoring.
Preventive Maintenance ProgramsEstablish preventive maintenance programs for electrical systems and equipment. Conduct regular inspections and testing to identify and address potential issues.
Troubleshooting and DiagnosticsProvide expertise in troubleshooting electrical malfunctions. Utilise diagnostic tools and techniques to identify and rectify problems promptly.
Safety ComplianceEnsure compliance with electrical safety standards and regulations. Implement safety measures, such as arc flash protection and lockout/tagout procedures.

Electrical Construction Work10 areas

Installation of Electrical SystemsExecute the installation of electrical systems based on approved designs. Coordinate with other construction disciplines to ensure seamless integration.
Wiring and CablingInstall wiring and cabling for power distribution, lighting, and communication systems. Follow industry standards for cable management and routing.
Panel Board InstallationInstall and connect panel boards for power distribution and control. Verify proper sizing and configuration according to project requirements.
Switchgear InstallationInstall switchgear for controlling and protecting electrical equipment. Ensure proper coordination with other protective devices in the system.
Electrical Equipment InstallationInstall various electrical equipment, including transformers, motors, and variable frequency drives (VFDs). Follow manufacturer specifications and industry standards.
Grounding and BondingImplement grounding and bonding systems to ensure electrical safety. Address grounding issues to prevent electrical hazards.
Lighting Fixture InstallationInstall lighting fixtures, including recessed lights, pendants, and outdoor lighting. Verify proper placement and connection for optimal illumination.
Testing and CommissioningConduct testing and commissioning of electrical systems before handing them over to the client. Verify the functionality and performance of installed components.
As-Built DocumentationCreate accurate as-built documentation reflecting the actual layout of installed electrical systems. Include details such as cable routing, equipment locations, and connection diagrams.
Project ManagementManage electrical construction projects, including scheduling, budgeting, and coordination. Ensure compliance with project specifications and client requirements.

Instrumentation/Control Engineering & Maintenance
Field Instrumentation Maintenance

Enquire about this service

Instrumentation/Control Engineering & Maintenance3 areas

Instrumentation SelectionSelect appropriate instrumentation devices such as sensors, transmitters, and actuators based on process requirements. Consider factors like accuracy, reliability, and compatibility with the controlled process.
SCADA Systems ImplementationImplement Supervisory Control and Data Acquisition (SCADA) systems for centralised monitoring and control. Ensure seamless communication between field instruments and the control center.
Process OptimisationImplement instrumentation and control strategies to optimise industrial processes. Utilise feedback control loops for efficient and stable operations.

Field Instrumentation Maintenance10 areas

Routine InspectionsConduct routine inspections of field instrumentation devices, including sensors, transmitters, and control valves. Check for physical damage, wear, and environmental conditions that may affect performance.
Calibration and AdjustmentPerform regular calibration of field instruments to ensure accurate measurements. Adjust settings and parameters to maintain optimal performance.
Preventive MaintenanceImplement preventive maintenance schedules for field instrumentation. Replace worn-out parts, clean sensors, and address minor issues before they escalate.
Diagnostic ChecksUse diagnostic tools and software to identify potential issues with field instruments. Analyse data trends to predict and prevent failures.
Instrument Loop ChecksConduct instrument loop checks to verify the communication and functionality of field instruments. Ensure proper integration with the control system.
Environmental ProtectionImplement measures to protect field instruments from harsh environmental conditions. Install protective enclosures and use appropriate materials for corrosion resistance.
Emergency RepairsRespond promptly to emergency situations by conducting on-the-spot repairs to critical instrumentation. Ensure spare parts and tools are readily available for urgent interventions.
Documentation and Record-KeepingMaintain accurate records of maintenance activities, including calibration data and repairs. Document changes to instrument settings or configurations.
Upgrades and RetrofitsPlan and execute upgrades or retrofits to improve the performance of field instrumentation. Integrate new technologies for enhanced functionality.
Collaboration with OperationsCollaborate closely with operations personnel to understand process requirements and feedback. Use operational insights to fine-tune instrumentation settings for optimal performance.

Marine Transportation & Support Services
Vessel Cleaning Services

Enquire about this service

Marine Transportation & Support Services10 areas

Logistics PlanningDevelop comprehensive logistics plans for marine transportation, considering cargo requirements, routes, and schedules. Coordinate with shipping companies, port authorities, and regulatory bodies.
Vessel CharteringProvide vessel chartering services to clients based on their cargo needs. Select appropriate vessels, taking into account cargo type, size, and destination.
Cargo Loading and UnloadingOversee the loading and unloading of cargo onto/from vessels. Implement efficient cargo handling procedures to minimise turnaround times.
Route OptimisationOptimise shipping routes to enhance efficiency and reduce fuel consumption. Consider weather conditions, sea currents, and other factors to determine the most cost-effective routes.
Customs ClearanceFacilitate customs clearance processes for imported and exported goods. Ensure compliance with customs regulations and documentation requirements.
Safety and SecurityImplement safety protocols to ensure the well-being of crew members and the security of cargo. Conduct regular safety drills and adhere to international maritime safety standards.
Emergency Response PlanningDevelop and implement emergency response plans for incidents such as accidents, spills, or adverse weather conditions. Train personnel on emergency procedures and evacuation protocols.
Crew ManagementProvide crew management services, including recruitment, training, and scheduling. Ensure compliance with international maritime labour standards.
Vessel MaintenanceCoordinate routine maintenance and inspections of vessels. Implement preventive maintenance programs to address issues before they become critical.
Environmental ComplianceAdhere to environmental regulations and implement practices to reduce the environmental impact of marine transportation. Monitor and manage ballast water, emissions, and waste disposal.

Vessel Cleaning Services10 areas

Hull CleaningConduct regular cleaning of vessel hulls to remove biofouling, barnacles, and marine growth. Improve vessel performance and fuel efficiency by maintaining a clean hull.
Tank CleaningProvide tank cleaning services for cargo and ballast tanks. Ensure compliance with cleanliness standards for different types of cargoes.
Cargo Hold CleaningClean cargo holds to prevent contamination and ensure the safe transport of various goods. Implement proper cleaning procedures based on cargo type.
Fuel Tank CleaningClean fuel tanks to remove sediment and contaminants. Enhance fuel quality and prevent engine issues.
Decontamination ServicesOffer decontamination services for vessels that have transported hazardous materials. Follow strict protocols for handling and disposing of hazardous residues.
Bilge CleaningClean bilge spaces to remove accumulated oil and water. Ensure compliance with environmental regulations related to bilge water discharge.
Underwater CleaningProvide underwater cleaning services for vessel components such as propellers and rudders. Enhance vessel maneuverability and efficiency.
Waste ManagementManage and dispose of cleaning waste in an environmentally responsible manner. Adhere to waste disposal regulations and promote recycling initiatives.
Inspections and SurveysConduct inspections and surveys of vessel surfaces to assess the need for cleaning. Provide recommendations for cleaning frequency and methods.
Compliance with RegulationsEnsure compliance with international and local regulations governing vessel cleaning practices. Stay updated on industry standards and best practices.

Technical and maintenance support for demanding offshore environments.

A focus on operational discipline, safety and dependable execution, supported by leadership with offshore asset maintenance experience.

Offshore capabilities

Construction, installation, maintenance and marine support.

Offshore Construction

Platform Installation
Subsea Pipelines
Topside Modifications
Living Quarters Installation
Jacket Fabrication and Installation
Bridge and Flare Installation
Riser Systems Installation
Mooring System Deployment
Offshore Wind Farm Construction
Underwater Surveys and Inspections

Maintenance and Repairs of Offshore Facilities

Routine Inspections
Corrosion Protection
Structural Integrity Assessments
Equipment Maintenance
Pipeline Repairs
Emergency Response Planning
Underwater Welding and Repairs
Replacement of Aging Infrastructure
Environmental Compliance
Documentation and Reporting

Transportation & Installation of Offshore Facilities

Logistics and Planning
Marine Transportation
Heavy Lift Operations
Installation Vessels
Subsea Infrastructure Installation
Platform Installation
Mooring Systems
Dismantling and Decommissioning
Weather and Wave Analysis
Quality Assurance and Inspection

Instrumentation/Control Engineering & Maintenance

Control System Design
Instrumentation Installation
SCADA Systems
PLC Programming
Emergency Shutdown Systems (ESD)
Calibration and Testing
Preventive Maintenance
Cybersecurity Measures
Hazardous Area Classification
Training Programs

Marine Transportation & Support Services

Logistics Planning
Vessel Chartering
Cargo Loading and Unloading
Route Optimisation
Customs Clearance
Safety and Security
Emergency Response Planning
Crew Management
Vessel Maintenance
Environmental Compliance

Vessel Cleaning Services

Hull Cleaning
Tank Cleaning
Cargo Hold Cleaning
Fuel Tank Cleaning
Decontamination Services
Bilge Cleaning
Underwater Cleaning
Waste Management
Inspections and Surveys
Compliance with Regulations

See full service descriptions

Offshore enquiries

Discuss your offshore requirements.

Request an Enquiry See Onshore Capabilities

Manpower Outsourcing

Professional and support services, technical or non-technical.

Expert consultation and advisory

Count on BEGAS Energy as your reliable ally.

Count on BEGAS Energy Sdn Bhd as your reliable ally, providing expert consultation and advisory services in the realms of manpower outsourcing. Our comprehensive offerings encompass professional and support services, catering to both technical and non-technical requirements.

Our expertise extends across diverse industries, with a specialised focus on serving Oil and Gas Majors in both upstream and downstream sectors. The acknowledgment and positive feedback from our esteemed long-term clients underscore our commitment to excellence.

Professional and support services

Expert consultation and advisory services in manpower outsourcing
Professional services
Support services

Technical or non-technical

Technical requirements
Non-technical requirements

Industries we serve

Focused on Oil and Gas Majors, upstream and downstream.

Upstream

Manpower outsourcing for Oil and Gas Majors in the upstream sector.

Downstream

Manpower outsourcing for Oil and Gas Majors in the downstream sector.

Long-term clients

The acknowledgment and positive feedback from our esteemed long-term clients underscore our commitment to excellence.

Why choose BEGAS Energy

Streamline your workforce management.

Our dedication to being the most dependable manpower agency in Malaysia means we prioritise your business's productivity.

Streamlined workforce

Streamline your workforce management with a dependable manpower partner.

Productivity first

We prioritise your business's productivity.

Savings

Significant savings in time, energy and costs associated with recruitment and personnel management.

Manpower enquiries

Discuss your manpower requirements.

Request an Enquiry Email admin@begasenergy.com

Privacy Policy

How BEGAS Energy Sdn Bhd handles the personal data you share through this website.

Last updated: October 2026.

1. Who we are

This website is operated by BEGAS Energy Sdn Bhd (company no. 548062), I-49-3A, Signature Office, KK Times Square, Off Coastal Highway, Jalan Coastal, 88100 Kota Kinabalu, Sabah, Malaysia. In this policy, "we" and "us" mean BEGAS Energy Sdn Bhd. We handle personal data in line with the Personal Data Protection Act 2010 of Malaysia.

2. What personal data we collect

We collect personal data only when you send us an enquiry through the contact form or contact us directly. This may include:

your name and company;
your email address and telephone number;
the service you are interested in;
the message you write to us; and
your confirmation that we may contact you about your enquiry.

Please do not include sensitive personal data, such as health or financial account details, in your message.

3. How we use it

We use the details you provide to read and respond to your enquiry, to discuss the services you ask about, and to keep a record of that conversation. The contact form asks for your agreement to this before you send it.

4. Who we share it with

We do not sell your personal data. Enquiries pass through the service providers that host this website and process form submissions on our behalf. Those providers may store data on servers outside Malaysia. We may also disclose personal data where the law requires it.

5. Cookies and third-party services

This website does not set advertising or tracking cookies. When you open a page, your browser requests fonts from Google Fonts, which means Google receives your IP address. If you follow the link to Google Maps, Google's own terms and privacy policy apply from that point.

6. How long we keep it

We keep enquiry details only for as long as we need them to deal with your enquiry and for our business records.

7. Keeping it secure

We take reasonable steps to protect personal data from loss, misuse and unauthorised access. No method of sending data over the internet is completely secure, so we cannot guarantee absolute security.

8. Your rights

You may ask us to confirm whether we hold personal data about you, to give you a copy, to correct it, or to stop using it for your enquiry. You may also withdraw your consent at any time. To make a request, email admin@begasenergy.com.

9. Changes to this policy

We may update this policy from time to time. The date at the top shows when it was last changed.

10. Contact us

Questions about this policy can be sent to admin@begasenergy.com.

Information required

For BEGAS to confirm before launch

This policy was drafted from how the website works today. Please confirm the retention period, the person or department that handles data requests, and any use of enquiry details beyond answering the enquiry. It should also be reviewed by BEGAS's legal adviser before it is published.

Engineering reliability. Powering offshore & onshore operations.

Built for Demanding Industrial Environments.

Six capability groups.One engineering partner.

Instrumentation & Offshore Installation

Onshore Fabrication & Specialist Commissioning

Offshore Construction, Maintenance & Repairs

Electrical Engineering & Construction

Field Instrumentation Maintenance

Marine Transportation & Vessel Cleaning

OnshoreOperations

OffshoreOperations

Looking for a Dependable Engineering Services Partner?

A Sabah engineering company serving oil and gas majors.

Built in Kota Kinabalu since 2008.

Where we are heading, and how.

Led by an engineer from the operator side.

Mohd Safian Saludin

The people behind every project.

Shahlan Rusian

Syahreezal Shamran

Ferran Jumat

D.K. Ilyan Nur Binti Ag Talip

Mohammad Syariqul Alam Akmadin

Ramlah Binti Sulah

Nurul Fadzeera Aleeda Binti Aldana

Salina Binti Rajikan

Mohd Azfer Syafiq Bin Mohd Hasnan

Four commitments to our clients.

Expertise

Innovation

Reliability

Adaptability

Technical depth, strong networks, fast mobilisation.

Technical competence

Network management

Support infrastructure

Integrated engineering, construction and maintenance services.

All service groups

Instrumentation/Control Engineering & MaintenanceTransportation & Installation of Offshore Facilities

Onshore FabricationCommissioning of Specialist Electrical, HVAC and instrumentation system

Offshore ConstructionMaintenance and Repairs of Offshore Facilities

Electrical Engineering & MaintenanceElectrical Construction Work

Instrumentation/Control Engineering & MaintenanceField Instrumentation Maintenance

Marine Transportation & Support ServicesVessel Cleaning Services

Onshore engineering and maintenance for industrial facilities.

Fabrication, commissioning, electrical and instrumentation.

Onshore Fabrication

Commissioning of Specialist Electrical, HVAC & Instrumentation Systems

Electrical Engineering & Maintenance

Electrical Construction Work

Field Instrumentation Maintenance

Discuss your onshore requirements.

Technical and maintenance support for demanding offshore environments.

Construction, installation, maintenance and marine support.

Offshore Construction

Maintenance and Repairs of Offshore Facilities

Transportation & Installation of Offshore Facilities

Instrumentation/Control Engineering & Maintenance

Marine Transportation & Support Services

Vessel Cleaning Services

Discuss your offshore requirements.

Manpower Outsourcing

Count on BEGAS Energy as your reliable ally.

Professional and support services

Technical or non-technical

Focused on Oil and Gas Majors, upstream and downstream.

Upstream

Downstream

Long-term clients

Streamline your workforce management.

Streamlined workforce

Productivity first

Savings

Discuss your manpower requirements.

Safety in Every Task. Quality in Every Delivery.

What we can state today.

Quality assurance & control

Environmental responsibility

HSE policy & safe work practices

Certifications & management systems

Six capability groups.
One engineering partner.

Onshore
Operations

Offshore
Operations

Instrumentation/Control Engineering & Maintenance
Transportation & Installation of Offshore Facilities

Onshore Fabrication
Commissioning of Specialist Electrical, HVAC and instrumentation system

Offshore Construction
Maintenance and Repairs of Offshore Facilities

Electrical Engineering & Maintenance
Electrical Construction Work

Instrumentation/Control Engineering & Maintenance
Field Instrumentation Maintenance

Marine Transportation & Support Services
Vessel Cleaning Services